Supplier Name |
N/A Nexen |
Manufacturer Part Number |
N/A 807655 |
Model Number |
N/A M-800 |
Approximate Clutch Facing Life |
N/A 1225 hp·hr |
Backlash |
N/A 0.36 º |
Bore Size |
N/A 1.4375 in |
Bore Type |
N/A Finished with Keyway and 2 Setscrews |
Clutch Air Chamber Volume when New |
N/A 0.644 in³ |
Clutch Air Chamber Volume when Worn Out |
N/A 2.000 in³ |
Clutch Category |
N/A Single Plate Clutch |
Clutch Facing Edge Color Code |
N/A Red |
Clutch Facing Effective Area |
N/A 30.63 in² |
Clutch Facing Type |
N/A Standard Coefficient |
Clutch Heat Sink Capacity |
N/A 110000 ft·lb |
Clutch Peak Thermal Input Rate |
N/A 27.60 hp |
Clutch Response Factor |
N/A 0.119 |
Clutch Type |
N/A Friction Clutch |
Coupling Type |
N/A Taper Lock Poly Disc |
Coupling Size |
N/A 7.000 in |
Design |
N/A Open |
Drive Arrangement |
N/A Pilot Mount |
Drive Inertia |
N/A 127.30 lb·in² |
Engagement |
N/A Air Engaged |
Release |
N/A Spring Release |
Finish |
N/A Black Oxide |
Function |
N/A Starting, Connect/Disconnect, Torque Limiting |
Harmonization Code |
N/A 8483.60.4000 |
Maximum Speed |
N/A 1800 rpm |
Maximum Continuous Thermal Dissipation |
N/A 1.00 hp |
Maximum Pressure |
N/A 80 psi |
Minimum Engagement Pressure |
N/A 5 psi |
Minimum Sprocket Size |
N/A 40/38T 50/31T 60/26T 80/21T |
Mounting Configuration |
N/A Shaft Mounted |
Overall Diameter |
N/A 8.06 in |
Overall Length |
N/A 7.31 in |
Pilot Diameter |
N/A 4.0000 in |
Pilot or Drive Flange Bolt Circle Data |
N/A 4, 5/16-18 Bolts at 90º on a 4.750 in. Circle |
Port Size |
N/A 1/8 in |
Port Type |
N/A National Pipe Thread (NPT) |
Rating |
N/A European Conformity (CE) Restriction of Hazardous Substances (RoHS) |
Shaft Inertia |
N/A 63.28 lb/in² |
Weight |
N/A 38 lb |
Static Torque at 80 Pound per Square Inch (psi) |
N/A Up to 1365 lb·in |
Transmitted Power |
N/A Up to 10 hp |
General Information |
N/A Air engaged straight bore shaft mounted clutch with sealed bearings. Static torque up to 1365 lb·in at 80 psi, maximum speed 1800 rpm, transmitted horsepower up to 10 hp, continuous thermal dissipation up to 1 hp, bores up to 1.625". Features sealed ball bearings, and splined hub. Available in pilot mount, integral sheave, and coupling models. Optional disc and caliper brake turns some models into clutch-brakes. Pilot mount clutches accept customer supplied pulleys, sprockets, or Nexen couplings. This unit has shielded bearings. Can be configured as a driving shaft mounted Clutch-Brake, with disc and caliper listed in accessories. |
