Supplier Name |
N/A Nexen |
Manufacturer Part Number |
N/A 802873 |
Model Number |
N/A B-275 |
Approximate Clutch Facing Life |
N/A 33 hp·hr |
Bore Size |
N/A 5/8 in |
Bore Type |
N/A Finished with Keyway and 2 Setscrews |
Bushing Details |
N/A Optional reducer bushings (0.000 to 0.500 in.) are sold separately. |
Clutch Air Chamber Volume when New |
N/A 0.201 in³ |
Clutch Air Chamber Volume when Worn Out |
N/A 0.630 in³ |
Clutch Category |
N/A Single Plate Clutch |
Clutch Facing Edge Color Code |
N/A Red |
Clutch Facing Effective Area |
N/A 4.173 in² |
Clutch Facing Type |
N/A Standard Coefficient |
Clutch Heat Sink Capacity |
N/A 5650 ft·lb |
Clutch Peak Thermal Input Rate |
N/A 3.80 hp |
Clutch Response Factor |
N/A 0.038 |
Clutch Type |
N/A Friction Clutch |
Design |
N/A Open |
Drive Arrangement |
N/A 1-3V Sheave |
Sheave Outside Diameter |
N/A 2.75 in |
Drive Inertia |
N/A 0.86 lb·in² |
Engagement |
N/A Air Engaged |
Release |
N/A Spring Release |
Finish |
N/A Machined Aluminum |
Function |
N/A Starting, Connect/Disconnect, Torque Limiting |
Harmonization Code |
N/A 8483.60.4000 |
Maximum Speed |
N/A 3600 rpm |
Maximum Continuous Thermal Dissipation |
N/A 0.13 hp |
Maximum Dynamic Torque Capacity |
N/A 85 in·lb |
Maximum Pressure |
N/A 80 psi |
Minimum Engagement Pressure |
N/A 8 psi |
Mounting Configuration |
N/A Shaft Mounted |
Overall Diameter |
N/A 2.89 in |
Overall Length |
N/A 3.51 in |
Port Size |
N/A 1/8 in |
Port Type |
N/A National Pipe Thread (NPT) |
Rating |
N/A European Conformity (CE) Restriction of Hazardous Substances (RoHS) |
Shaft Inertia |
N/A 0.98 lb/in² |
Weight |
N/A 3.500 lb |
Static Torque at 80 Pound per Square Inch (psi) |
N/A Up to 100 lb·in |
Transmitted Power |
N/A Up to 1.0 hp |
General Information |
N/A Static torque up to 100 lb·in at 80 psi, maximum speed 3600 rpm, transmitted power up to 1.0 hp, continuous thermal dissipation up to 0.13 hp, bores up to 0.625". Features sealed, ball bearings and splined hub. Available in pilot mount, integral sheave, and coupling models. This clutch's bore can be reduced with bushings found in accessories. |
