Supplier Name |
N/A Nexen |
Manufacturer Part Number |
N/A 950353 |
Model Number |
N/A H-1000 |
Approximate Clutch Facing Life |
N/A 2287 kW·hr |
Bore Size |
N/A 30 mm |
Bore Type |
N/A Finished with Keyway and 2 Setscrews |
Clutch Air Chamber Volume when New |
N/A 33.462 cm³ |
Clutch Air Chamber Volume when Worn Out |
N/A 10.320 cm³ |
Clutch Category |
N/A Single Plate Clutch |
Clutch Facing Edge Color Code |
N/A Red |
Clutch Facing Effective Area |
N/A 324.30 cm² |
Clutch Facing Type |
N/A Standard Coefficient |
Clutch Heat Sink Capacity |
N/A 312000 J |
Clutch Peak Thermal Input Rate |
N/A 33.70 kW |
Clutch Response Factor |
N/A 0.230 |
Clutch Type |
N/A Friction Clutch |
Design |
N/A Open |
Drive Arrangement |
N/A Pilot Mount |
Drive Inertia |
N/A 1254.15 kg·cm² |
Engagement |
N/A Air Engaged |
Release |
N/A Spring Release |
Finish |
N/A Black Oxide |
Function |
N/A Starting, Connect/Disconnect, Torque Limiting |
Harmonization Code |
N/A 8483.60.4000 |
Maximum Speed |
N/A 1800 rpm |
Maximum Continuous Thermal Dissipation |
N/A 1.68 kW |
Maximum Pressure |
N/A 6.0 bar |
Minimum Engagement Pressure |
N/A 0.3 bar |
Minimum Sprocket Size |
N/A 100/27T 80/35T |
Mounting Configuration |
N/A Shaft Mounted |
Overall Diameter |
N/A 255.5 mm |
Overall Length |
N/A 215.9 mm |
Pilot Diameter |
N/A 120 mm |
Pilot or Drive Flange Bolt Circle Data |
N/A 4, M10 Bolts at 90º on a 144 mm Circle |
Port Size |
N/A 1/4 in |
Port Type |
N/A British Standard Pipe Taper (BSPT) |
Rating |
N/A European Conformity (CE) Restriction of Hazardous Substances (RoHS) |
Shaft Inertia |
N/A 527.79 kg/cm² |
Static Torque Capacity |
N/A Up to 455 N·m |
Weight |
N/A 63 lb |
Transmitted Power |
N/A Up to 18.6 hp |
General Information |
N/A Pilot mount clutches accept customer supplied pulleys or sprockets. Static torque up to 455 Nm, maximum speed 1800 rpm, transmitted power up to 18.6 kW, continuous thermal dissipation up to 1.68 kW, bores up to 50 mm. Features sealed ball bearings, and splined hub. Available in pilot mount models only. |
