Supplier Name |
N/A Nexen |
Manufacturer Part Number |
N/A 917800 |
Model Number |
N/A 4H40 |
Approximate Clutch Facing Life |
N/A 107 hp·hr |
Bore Size |
N/A 1-1/4 in |
Bore Type |
N/A Finished with Keyway and 2 Setscrews |
Clutch Air Chamber Volume when New |
N/A 0.330 in³ |
Clutch Category |
N/A Multiple Disc Clutch |
Clutch Facing Edge Color Code |
N/A Red |
Clutch Facing Effective Area |
N/A 38.12 in² |
Clutch Facing Type |
N/A Standard Coefficient |
Clutch Heat Sink Capacity |
N/A 9590 ft·lb |
Clutch Peak Thermal Input Rate |
N/A 34.30 hp |
Clutch Response Factor |
N/A 0.066 |
Clutch Type |
N/A Friction Clutch |
Design |
N/A Open |
Drive Arrangement |
N/A Flange Mount |
Engagement |
N/A Air Engaged |
Release |
N/A Spring Release |
Air Chamber Finish |
N/A Aluminum |
Drive Shell Finish |
N/A Black Oxide |
Function |
N/A Starting, Connect/Disconnect, Torque Limiting |
Harmonization Code |
N/A 8483.60.4000 |
Maximum Speed at 50 Pound per Square Inch (psi) |
N/A 1800 rpm |
Maximum Speed at 60 Pound per Square Inch (psi) |
N/A 1400 rpm |
Maximum Speed at 70 Pound per Square Inch (psi) |
N/A 1100 rpm |
Maximum Speed at 80 Pound per Square Inch (psi) |
N/A 800 rpm |
Maximum Continuous Thermal Dissipation |
N/A 0.15 hp |
Maximum Pressure |
N/A 80 psi |
Minimum Engagement Pressure |
N/A 10 psi |
Mounting Configuration |
N/A Shaft Mounted |
Overall Diameter |
N/A 5.00 in |
Overall Length |
N/A 3.38 in |
Pilot or Drive Flange Bolt Circle Data |
N/A 4, 1/4-20 Bolts at 90º on a 4.250 in. Circle |
Port Size |
N/A 1/8 in |
Port Type |
N/A National Pipe Thread (NPT) |
Rating |
N/A European Conformity (CE) Restriction of Hazardous Substances (RoHS) |
Shaft Inertia |
N/A 4.87 lb/in² |
Weight |
N/A 11.63 lb |
Static Torque at 80 Pound per Square Inch (psi) |
N/A Up to 10000 lb·in |
General Information |
N/A 4H multi-disc flange mounted clutches provide big torque in a small package. Available in 7 sizes with static torque up to 10000 lb·in at 80 psi, bores up to 2.375 in. More durable, and higher RPM than the LSCC clutch series. The flange/drive shell of this clutch has no support bearing of its own so is supported by what is being driven or can be secured to the machine frame and used as a brake. Consult Nexen for use in cyclic applications, or use as a brake. Drive shell support is provided by bearing mounted flywheel or Pulley or Sprocket. |
