Item # 05829584, Nexen 585 Pound (lb) Holding Force Profile Rail Brake On Motion Industries, Inc.

Unit of Measure

Specifications | Features & Benefits | General Information

Supplier Name	N/A Nexen
Manufacturer Part Number	N/A 968183
Air Chamber Volume	N/A 28.600 cm³
Approximate Engagement Response Time	N/A 0.080 s
Backlash	N/A <0.20 in
Brake Series	N/A RB45B
Engagement	N/A Spring Engaged
Release	N/A Air Release
Facing Kit	N/A 968363
Finish	N/A Black Oxide
Function	N/A Stopping and Holding
Holding Force	N/A 585 lb
Life Rating	N/A More than 1,000,000 Static Holding Cycles
Mass	N/A 7.68 lb
Maximum Backlash at Full Brake Force	N/A 0.008 in
Maximum Pressure	N/A 129 psi
Minimum Release Pressure	N/A 80 psi
Overall Height	N/A 1.969 in
Overall Length	N/A 5.000 in
Overall Width	N/A 4.705 in
Port Size	N/A M6 x 1.0
Rail Series	N/A LWE
Rail Size	N/A 45 mm
Rail/Carriage Manufacturer	N/A IKO
Rating	N/A European Conformity (CE) Restriction of Hazardous Substances (RoHS)
Weight	N/A 8.800 lb

N/A

Large friction facing contact area for consistent performance and low rail wear
Field serviceable friction facing replacement
Ideal for power-off, e-stop and holding applications
Low backlash for accurate position holding
Brake geometry is similar to linear bearing cassettes for easy installation
Provides stiffness and eliminates vibration in linear drives
Large clearance between brake and rail compensates for installation misalignment
No lubrication or periodic maintenance required
Models available to fit most common profile guide rails
Highest spring engaged / air released holding force on the market
Static holding cycle life in excess of one million cycles

N/A Not for use in cyclic dynamic braking applications.

Supplier Name