Supplier Name |
N/A Nexen |
Manufacturer Part Number |
N/A 810068 |
Model Number |
N/A H-1000 |
Approximate Clutch Facing Life |
N/A 1840 hp·hr |
Backlash |
N/A 0.21 º |
Bore Size |
N/A 1.6875 in |
Bore Type |
N/A Finished with Keyway and 2 Setscrews |
Clutch Air Chamber Volume when New |
N/A 1.246 in³ |
Clutch Air Chamber Volume when Worn Out |
N/A 5.248 in³ |
Clutch Category |
N/A Single Plate Clutch |
Clutch Facing Edge Color Code |
N/A Purple |
Clutch Facing Effective Area |
N/A 50.27 in² |
Clutch Facing Type |
N/A High Coefficient |
Clutch Heat Sink Capacity |
N/A 230000 ft·lb |
Clutch Peak Thermal Input Rate |
N/A 45.20 hp |
Clutch Response Factor |
N/A 0.230 |
Clutch Type |
N/A Friction Clutch |
Coupling Type |
N/A Taper Lock Poly Disc |
Coupling Size |
N/A 8.000 in |
Design |
N/A Open |
Drive Arrangement |
N/A Pilot Mount |
Drive Inertia |
N/A 428.77 lb·in² |
Engagement |
N/A Air Engaged |
Release |
N/A Spring Release |
Finish |
N/A Black Oxide |
Function |
N/A Starting, Connect/Disconnect, Torque Limiting |
Harmonization Code |
N/A 8483.60.4000 |
Maximum Speed |
N/A 1800 rpm |
Maximum Continuous Thermal Dissipation |
N/A 2.25 hp |
Maximum Pressure |
N/A 80 psi |
Minimum Engagement Pressure |
N/A 5 psi |
Minimum Sprocket Size |
N/A 100/20T 40/45T 50/37T 60/31T 80/24T |
Mounting Configuration |
N/A Shaft Mounted |
Overall Diameter |
N/A 10.06 in |
Overall Length |
N/A 8.50 in |
Pilot Diameter |
N/A 4.8750 in |
Pilot or Drive Flange Bolt Circle Data |
N/A 4, 3/8-16 Bolts at 90º on a 5.625 in. Circle |
Port Size |
N/A 1/8 in |
Port Type |
N/A National Pipe Thread (NPT) |
Rating |
N/A European Conformity (CE) Restriction of Hazardous Substances (RoHS) |
Shaft Inertia |
N/A 180.44 lb/in² |
Weight |
N/A 64.68 lb |
Static Torque at 80 Pound per Square Inch (psi) |
N/A Up to 3920 lb·in |
Transmitted Power |
N/A Up to 25 hp |
General Information |
N/A Air engaged straight bore shaft mounted clutch with sealed bearings. Static torque up to 3920 lb·in at 80 psi, maximum speed 1800 rpm, transmitted power up to 25 hp, continuous thermal dissipation up to 2.25 hp, bores up to 1.938". Features sealed ball bearings, and splined hub. Available in pilot mount, integral sheave, and coupling models. Optional disc and caliper brake turns some models into clutch-brakes. Pilot mount clutches accept customer supplied pulleys, sprockets, or Nexen couplings. Can be configured as a driving shaft mounted Clutch-Brake, with disc and caliper listed in accessories. |
