Item # 04487638, Nidec 1740 Revolutions per Minute (rpm) Base Speed Severe Duty Motor On Motion Industries, Inc.

Unit of Measure

Specifications | Applications | Features & Benefits

Supplier Name	N/A US Motors (Nidec)
Manufacturer Part Number	N/A H1P2H
Ambient Temperature	N/A 40 ºC
Base Speed	N/A 1740 rpm
Duty/Condition Type	N/A Continuous Duty
Enclosure Type	N/A Totally Enclosed Fan Cooled (TEFC)
Frame Material	N/A Steel
Frame Size	N/A 143T
Frequency	N/A 60 Hz
Harmonization Code	N/A 8501.51.6040
Type	N/A General Severe Duty Motor
Power for 4 Poles	N/A 1 hp
Phase	N/A 3
Number of Poles	N/A 4
Supply Voltage	N/A 200 V
Mounting Type	N/A Footed Horizontal
National Electrical Manufacturers Association (NEMA) Design Class	N/A B
Synchronous Speed	N/A 1800 rpm
Weight	N/A 45.00 lb

N/A Chemical Plants Foundries Mines Pulp and Paper Plants Saw Mills Waste Management Facilities

N/A

Class F insulation, Class B rise at full load on 60 Hz sine wave power
All cast iron construction (steel frame and fan cover on 140 frame)
Corrosion-resistant mill and chemical-duty paint
Stainless steel nameplate (with CE mark) and zinc plated hardware
Shaft slinger on pulley end for IP54 protection
Precision balance ( 0.08 IN/sec vibration)
40 ºC ambient, NEMA Design B performance on 60 Hz sine wave power
Regreasable bearings (180 frame and up), lifting provisions (180 frame and up)
Double shielded bearings (140 - 360), open on (400 - 440)
Oversized conduit box: One size larger than NEMA standard
Cast iron inner bearing caps (180 frame and larger)
Field convertible to F2 mounting (180 frame and larger)
Condensation drains with plastic plugs
Applications: For pulp and paper, mill and chemical and any other severe-duty environments found in the process industries

Supplier Name